GST102 Infrared Reflective Beam Smoke Detector
Conventional Reflective Beam Detector (hereinafter called the detector) is a non addressable reflective infrared beam smoke detector, which must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. With excellent built-in microprocessor, the detector has strong ability of analysis and judgment. […]
MCP-EW Manual Call Point Weather-proof Enclosure
MCP-EW manual call point enclosures provide a weather proof enclosure for ANSORL manual call points. Access to the manual call point is provided by an easy-to-operate Lock, to unlock the hinged transparent cover. The weather proof enclosure provides fire detection and alarm system designers with a premium solution for outdoor life safety and property protection […]
MCP-05 Manual Pull Station
AS-MCP-05 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when the switch inside is closed. So AS-MCP-05 conventional manual call point is only used with conventional […]
SHD109 Smoke/Heat Combined Detector
AS-SHD109 Smoke&Heat Detector work perfectly with all conventional intelligent fire control panels This Conventional Multi-detector uses an intelligent optical sensing chamber and a thermal sensor at the same time to detect smoke and heat. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels where […]
IRBD Reflective Beam Smoke Detector
1. AS-IRBD Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real user friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and […]
Bell-6 Fire Bell
The AS-BELL-6 Electric bell of notification appliances offers a wide range of Sound, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 24 volt DC systems. The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability […]
SSG-03 Strobe Sounder
AS-SSG-03 Sound Strobe of notification appliances offers a wide range of Sound/strobes, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 24 volt DC systems. The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of […]
MCP-2D Manual Call Point
This kind of manual call point is usually stalled at the entrance and exit place,the people on site will push the button to send an alarm signal to control center in case of emergency. When the control center receives this signal,it will shows the serial number or place where the signal comes from.thus security or […]
HD105 Heat Detector
AS-HD105 Heat detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the […]
SD102 Smoke Detector
AS-SD102 smoke detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the […]
BFP-16 Fire Alarm Control Panel
The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. The panel can be wall mounted and the generously sized metal back […]