XPERT 7 Base 6″
45681-225APO All detectors in the XP95A product line fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detector terminals. XPERT Cards are supplied with all bases. XPERT addressing One-way fit Locking feature to prevent unauthorised removal
XPERT 7 Base 4″ – Isolating
45681-284UL The base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits. Detects wiring short-circuits High brightness LED Up to 20 detectors or their equivalent load, may be installed between isolating bases
XPERT 7 Base 4″
45681-210UL The base is a low insertion force base with stainless steel contacts allowing easy and quick installation. XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the XP95A detector ra
– Soteria UL Base 4”
SA5000-210APO The Soteria UL Base – 4″ base is an easy-fit 4″ base, compatible with Apollo’s latest Soteria UL and XP95A detector ranges. Single base that supports isolated Soteria UL and non-isolated XP95A detectors 8 bit address card for additional address support when used with Soteria UL detectors and CoreProtocol Designed to replace shallow and […]
Isolator Base
45681-211USA The Isolator Base is unique and designed to only accept the Isolator 55000-720.
XP95A Smoke Detector – UL268 7th Edition
SA5050-250APO The XP95A Smoke Detector uses new sensing technology, Purelight®, to detect smoke particles entering the chamber. This reduces the possibility of false alarms whilst increasing the reliability of detection of a real fire. Fully approved to the latest UL268 7th Edition and FM standards Purelight® optical technology provides enhanced smoke detection and false alarm […]
XP95A Photoelectric Smoke Detector
55000-650APO The XP95A Photoelectric Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. Reliable fire detection in areas with a wide temperature range from 32°F to 100°F Ideal for escape routes Unaffected by wind and atmospheric pressure Insect resistant screen
XP95A Multi-Sensor Detector (Photoelectric/Heat)
55000-886APO The XP95A Multi-Sensor Detector combines independent photoelectric smoke and temperature sensors for better fire detection in areas with deceptive phenomena. Reliable fire detection in areas with a wide temperature range from 32°F to 100°F Well suited to environments such as hotel bedrooms, warehouses and loading docks Unaffected by wind and atmospheric pressure Alternative to […]
XP95A Multi-Criteria Detector (Smoke/Heat) – UL268 7th Edition
SA5050-350APO The XP95A Multi-Criteria Detector (Smoke/Heat) uses new photoelectric sensing technology, Purelight®, to detect smoke particles entering the chamber. It reduces the possibility of false alarms whilst increasing the reliability of detecting a real fire. Fully approved to the latest UL268 7th Edition and FM standards Purelight® optical technology provides enhanced smoke detection and false […]
XP95A Heat Detector (135˚F)
55000-450APO The XP95A Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 135°F. Reliable fire detection in areas with a wide temperature range from 32°F to 151°F Ideal for environments that are dirty or smoky under normal circumstances Unaffected by […]
XP95A Heat Detector – UL521 7th Edition
SA5500-450APO The XP95A Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature. It is classified as an ordinary detector by UL. Compatible with all devices from the latest UL268 7th Edition approved XP95A range Electronic temperature sensing Backwards compatible with legacy XP95A systems XP95 […]
Smoke Capsule (Pack of 3)
29600-464 Testifire Capsules use the latest technology stimuli generation and delivery, eliminating detector contamination and damage risk through controlled release.
Cordless Heat Detector Tester
29600-212 Test and maintenance equipment for smoke, heat and CO detectors.
Flame Detector Test Set
29600-226 The Flame Detector Test Set is a tool which is designed to test flame detectors without the need of real flames. Mimics the characteristics of real flames
Orbis Base Cover
45681-519APO A waterproof cover is designed for the Orbis Base – Heated.