Conduit Box
The Conduit Box is a versatile accessory for surface mounting Apollo bases. The box has knockouts to accept PG16 or M20 cable glands, conduit or mini trunking. Self-tapping screws are included to fit the detector base to the conduit box. Easy to install Aesthetically pleasing Colour matched to detector and base
Discovery Aspirating Smoke Detector – Single Point
The Discovery Aspirating Smoke Detector (ASD) is a point based professional air-sampling unit, designed to complement analogue addressable system technology. It combines standard field serviceable smoke detectors with a stand-alone air sampling solution to provide protection of difficult to access, environmentally demanding, aesthetic or architecturally restricted areas. EN 54-20 approved Available as a single (ASD-1) […]
Discovery Aspirating Smoke Detector – Dual Point
The Discovery Aspirating Smoke Detector (ASD) is a point based professional air-sampling unit, designed to complement analogue addressable system technology. It combines standard field serviceable smoke detectors with a stand-alone air sampling solution to provide protection of difficult to access, environmentally demanding, aesthetic or architecturally restricted areas. EN 54-20 approved Available as a single (ASD-1) […]
Duct Detector Sampling Tube (750-1500mm duct width)
Sampling Tube for duct smoke detectors.
Duct Detector Sampling Tube (300-750mm duct width)
Sampling Tube for duct smoke detectors.
Duct Detector Sampling Tube (1500-3000mm duct width)
Sampling Tube for duct smoke detectors.
Duct Detector Housing (XPERT 7)
The Duct Detector Housing provides early detection of smoke in the air moving through heating and ventilation (HVAC) ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire when used with a XP95 or Discovery detector.
XP95 Flame Detector (UV/IR2) – Base Mounted
The XP95 Flame Detector (UV/IR2) is designed to protect open indoor areas such as aircraft houses, generator rooms and paint works where open flaming fires may be expected. The detector has a UV and dual IR sensors responding to different wavelengths in order to discriminate between flames and spurious sources of radiation. Responds to stationary […]
XP95 Flame Detector (UV) – Base Mounted
The XP95 Flame Detector (UV) is designed to protect enclosed indoor areas where open fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of […]
XP95 Flame Detector (IR3) – Base Mounted
The XP95 Flame Detector (IR3) is designed to protect all indoor areas, even in dirty or smoky conditions where open flaming fires may be expected. The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. Responds to stationary flames with no flicker […]
XP95 Flame Detector (IR3)
The XP95 Flame Detector (IR3) is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency, flickering infra-red radiation emitted by flames during combustion. Loop-powered Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the […]
XP95 Flame Detector (IR2)
The XP95 Flame Detector (IR2) is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, […]
Flame Detector Weather Shield
The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight
Flame Detector Bracket
The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Allows flame detector to be mounted in any orientation.
Exd Flame Detector Weather Shield
The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight