Emergency Circuits
Working voltage: 24VDC Installation: Zone 1&2 Capacity: Driver for Lanterns, Fog Horns & Obstruction lights Navigation aids emergency circuits in Atex enclosure This equipment is suitable to supply the navigation aid equipment or aeronautical obstruction lights during ESD phases, when the centralized control panel is cutting off for safety reasons. Main advantage Enclosure made in […]
Control Panel (Indoor Version)
Made in: Iron sheet, thickness 15/10 Paint: In accordance with the standard constructor procedure Colour: On request Typical high: 2000mm (min 1600/max 2200, without socket) Navigation aids indoor control panel made on customer specification, in accordance with applicable rules The control panel is suitable for inside installation (in the control room) in safe area. It’s […]
Control Panel (Ex Version)
Working voltage: 24VDC or 230VAC Installation: Zone 1&2 Protection degree: IP 66 Navigation aids centralized control panel made on customer specification and in accordance with applicable rules The Ex control panel is suitable for outdoor installation in classified area (1&2).It’s suitable to contain any electrical devices like drive circuits, battery chargers, voltage stabilizers, telemetry interfaces, […]
Repeater Light
Average power: 7W peak (on time) – 1W (off time) Colour: Light with red colour as define in ICAO In accordance to: ICAO & CAA CAP 437 Protection degree: IP 66 Helideck status lights. The repeater lights are used to guarantee the “on deck” 360° coverage in azimuth where only statu light are not sufficient. […]
Status Lights
Average power: 70W average at 2hz Colour: Light with red colour as define in ICAO In accordance to: ICAO & CAA CAP 437 Protection degree: IP 66 Helideck status lights. The status lights system in accordance with ICAO annex 14, CAA CAP 437 is designed to be visible (at least one light) to the pilot […]
Fog Detector (Safe Area)
– Visibility threshold and delay dully programmable – Completed with fault alarm delay – Accurate measurement of prevailing visibility Navigation aids Fog detector – Visibility meter This equipment is used for fog horn automatic activation on offshore platform, in compliance with IALA recommendations. Main advantage Easy to install Compact and light weight Certificates Visibility meter […]
Fog Detector (Atek)
– Visibility threshold and delay dully programmable – Completed with fault alarm delay – Accurate measurement of prevailing visibility Navigation aids Ex fog detector – Visibility meter This equipment is used for fog horn automatic activation on offshore platform, in compliance with IALA recommendations and ATEX directive. Main advantage Easy to install Compact and light […]
Fog Horn NV-V4
Power supply: 24VDC – 230VAC or other voltage in option Sound power supply: 84W at 24VDC Sound range: 2 nautical mile (main) 1 nautical mile (secondary) Protection degree: IP 66 -40°C/+55°C Navigation aids 2 nautical miles for the main Fog horn and 1 nautical mile for secondary fog horn use on offshore platform. The Sice […]
Fog Horn NV-V3
Power supply: 24VDC – 230VAC or other voltage in option Input power: 84W at 24VDC Sound range: 2 nautical mile Protection degree: IP 66 -40°C/+55°C Navigation aids 2 nautical miles Fog horn in compliance with IALA recommendations. The Sice NV-V3 represents the ideal solutions for any problem concerning signalling obstruction in difficult environments were these […]
Fog Horn NV-V2
Power supply: 24VDC – 230VAC or other voltage in option Input power: 160W peak at 24VDC Sound range: 2 nautical mile Protection degree: IP 66 -40°C/+55°C Navigation aids 2 nautical miles Fog horn in compliance with IALA recommendations. The Sice NV-V2 represents the ideal solutions for any problem concerning signalling obstruction in difficult environments were […]
Photocell
Power supply: 24VDC – 230VAC or other voltage in option Installed with: Ex certificate enclosure Navigation aids photocell (Light sensor). Used for the signal light system automatic activation, in compliance with IALA recommendations Main advantage Low power consuption Suitable for classified area 1&2 Redudant system (by 3 photocell) Certificates ATEX – IECEx Certifications CE Marking […]
Marine Lantern 15NM
Power supply: 24VDC – 230VAC or other voltage in option Input power: 450W peak Luminose range: 15 nautical mile (white light) Expected life time: more 25000 working hours Marine Navigation aids 15NM lantern in compliance with IALA recommendations. This signal light represents the ideal solution for any problems concerning signalling obstruction in difficult environments were […]
Marine Lantern
Power supply: 24VDC – 230VAC or other voltage in option Input power: 25W during flahing (10 miles) / 5W during flashing (5 miles) Luminose range: 10 nautical mile (white light) / 5 nautical mile (red light) Expected life time: more 50000 working hours Marine Navigation aids 10NM or 5NM lantern in compliance with IALA recommendations. […]
Self-Contained Marine Lantern
Flashing Characteristics: All IALA flash patterns (others on demand) Lantern body: Enamelled stainless steel Luminose range: Up to 6 nautical mile Expected life time: 100000 working hours Type CL 299 temporary self-contained marine lantern. Integrated system composed of: lantern, solar panel, solar charge regulator, photocell and battery Main advantage Stainless steel body Temperature range from […]
Temporary System (2 Version)
Made in: AISI 316L SS structure characteristics: Primary battery powered navaid Installation: Suitable for classified area Power supply: 12 or 24 VDC Temporary navigation aid system This system is used to mark equipment temporarly. Completed with LED lantern, photocell, fog horn, batteries and protection switches. The system starts to work when the switches are actived. […]