Apollo Fire Archives - Page 20 of 39

Flame Detector Weather Shield

29600-206 The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight

29600-203 The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Allows flame detector to be mounted in any orientation.

Exd Flame Detector Weather Shield

29600-228 The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight

Conventional Flame Detector (UV/IR2) [SIL2]

55000-064APO The combination of UV and IR2 detection, plus signal processing allows the sensor to be used without risk of false alarms in difficult situations chracterised by factors such as flickering blackbody by radiation or arc welding. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed […]

Conventional Flame Detector (IR3) [SIL2]

55000-019APO The Conventional Flame Detector (IR3) is designed for harsh environments in indoor applications. The detector has three sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self […]

Conventional Flame Detector (IR2) [SIL2]

55000-060APO The Conventional Flame Detector (IR2) is designed for harsh environments in indoor applications. The detector has two sensors which respond to different IR wavelengths to discrimintae between flames and spurious sources of radiation. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self test […]

Reflective Beam Detector Head (Add-on) – Auto-Aligning

29650-070 Additional Head for the Auto-Aligning Beam Detector.

Conventional Reflective Beam Detector – Auto-Aligning

29650-069 The Conventional Reflective Beam Detector comprises of a ground level controller, detector head with auto-aligning feature, integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.

Conventional End to End Beam Detector

29600-929 The Conventional End to End Beam Detector has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The […]