Series 65 Base – Sav-Wire
45681-206APO The Series 65 Sav-Wire Base is designed to allow Series 65 detectors to be used in ‘Sav-Wire’ detection and alarm systems and can only be used in conjunction with a Sav-Wire compatible control panel. The base incorporates a circuit which detects the removal of a detector head. If a detector is removed from the […]
Series 65 Base – Relay (12V)
45681-508APO The base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a ‘latching’ position. For security systems the jumper is moved to another position so that the base is ‘non-latching’. Detector locking mechanism One-way fit Easy to wire Contains an earth connector […]
Series 65 Base – Relay
45681-245APO The base provides one set of volt-free, changeover (form C) contacts that change state when the detector signals an alarm. Detector locking mechanism One-way fit Easy to wire Contains an earth connector
Series 65 Base – End-of-Line Relay (24V)
45681-248APO The base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay. Detector locking mechanism One way fit Easy to wire Contains an earth connector
Series 65 Base – End-of-Line Relay (12V)
45681-247APO The base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay. Detector locking mechanism One way fit Easy to wire Contains an earth connector
Series 65 Base – Diode
45681-201APO The base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a Schottky diode on the “L1 IN” and “L1 OUT” wiring terminals. This base can be used with compatible control equipment. Detector locking mechanism One way fit Easy […]
Series 65 Base – Auxiliary Relay
45681-246APO The base provides two sets of volt-free changeover contacts to facilitate the switching of a remote LED or other auxiliary device. Detector locking mechanism One way fit Easy to wire Contains an earth connector
Series 65 Base
45681-200APO The Series 65 Base has been designed to enable detectors to be fitted without the need of force – particularly useful when fitting to suspended ceilings. All Series 65 bases have a one-way only fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver. Detector locking mechanism […]
Series 65 Optical Smoke Detector – Flashing LED & Magnetic Test
55000-315APO The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state but produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited […]
Series 65 Optical Smoke Detector – Flashing LED
55000-316APO The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to […]
Series 65 Optical Smoke Detector
55000-317APO The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to […]
Series 65 Heat Detector (CS) – Flashing LED
55000-136APO The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test […]
Series 65 Heat Detector (CS)
55000-137APO The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test […]
Series 65 Heat Detector (CR) – Flashing LED
55000-131APO The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test […]
Series 65 Heat Detector (CR)
55000-132APO The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test […]