Emergency Circuits
Working voltage: 24VDC Installation: Zone 1&2 Capacity: Driver for Lanterns, Fog Horns & Obstruction lights Navigation aids emergency circuits in Atex enclosure This equipment is suitable to supply the navigation aid equipment or aeronautical obstruction lights during ESD phases, when the centralized control panel is cutting off for safety reasons. Main advantage Enclosure made in […]
Control Panel (Indoor Version)
Made in: Iron sheet, thickness 15/10 Paint: In accordance with the standard constructor procedure Colour: On request Typical high: 2000mm (min 1600/max 2200, without socket) Navigation aids indoor control panel made on customer specification, in accordance with applicable rules The control panel is suitable for inside installation (in the control room) in safe area. It’s […]
Control Panel (Ex Version)
Working voltage: 24VDC or 230VAC Installation: Zone 1&2 Protection degree: IP 66 Navigation aids centralized control panel made on customer specification and in accordance with applicable rules The Ex control panel is suitable for outdoor installation in classified area (1&2).It’s suitable to contain any electrical devices like drive circuits, battery chargers, voltage stabilizers, telemetry interfaces, […]
Dual intensity obstruction lights
Power supply: 24VDC – 230VAC or other voltage in option luminose intensity: 20000 cd day mode, white, 2000 cd night mode, RED Ambient temperature: -52°C/+60°C Protection degree: IP 65 Dual intensity obstruction lights (MIOL AB – MIOL AC) in compliance with ICAO regulation. This MIOL AB-AC represents the ideal solution for any problems concerning signalling […]
Medium Intensity Obstruction Light – Miol
Power supply: 24VDC – 230VAC or other voltage in option luminose intensity: 2000 cd night mode, RED flashing for MIOL-B, 2000 cd night mode, RED steady burning for MIOL_C Ambient temperature: -52°C/+60°C Protection degree: IP 65 Aircraft warning lights (LIOL B – LIOL C) in compliance with ICAO regulation. This MIOL B-C represents the ideal […]
low Intensity Obstuction Light-Liol
Power supply: 24VDC – 230VAC or other voltage in option luminose intensity: >10 cd LIOL A, >32 cd LIOL B Ambient temperature: -50°C/+55°C Protection degree: IP 66 Aircraft warning lights (LIOL A-B) in compliance with ICAO regulation. This LIOL represents the ideal solution for any problems concerning signalling aeronautical obstruction in difficult environments were these […]
Solar powered aircraft warning light
Made in: AISI 316L SS structure Compliant with: ICAO LIOL A/B & CAP 168 group A/B Installation: Suitable for classified area zone 2 Power supply: 12 or 24 VDC Solar powered aircraft warning light Low intensity obstruction light, complete autonomous system, solar powered, having high efficiency and low power consumption. It can be used to […]
Boat Landing Panel
Power supply: 24VDC – 230VAC or other voltage in option Installation: Suitable for zone 1&2 Protection degree: IP 66 -20°C/+50°C Navigation aids boat landing control panel. This equipment is suitable to supply the boat landing lights during ESD phases, when the centralized control panel is cutting off for safety reasons. Main advantage AISI 316L stainless […]
Radio Beacon
Frequency range: 200-535 KHz Selectable modulation frequency: 400Hz – 1020Hz Accessories: Completed with ROS protection, automatic changeover & manual antenna tuner type RBA Emergency Locator Radio Transmitter Marine Radio Beacon (NDB) RBM 50: Omnidirectional radio transmitter modulated in amplitude modulation on a specific frequency on a platform. Main advantage Fully programmmable by front control panel […]
Battery Box
Made in: AISI 316L SS structure Installation: Suitable for classified area 1&2 Navigation aids system Battery Box This system is used for NiCd or Lead batteries, of various capacity with different dimensions. Main advantage System completely Atex certified The technical caracteristics can be change on request of the customer Suitable for classified area (zona 1&2) […]
Battery Cut Off
Working voltage: 24VDC Installation: Zone 1&2 Enclosure material: Light alloy Navigation aids battery cut off circuit in Atex enclosure This equipment connects the battery charger, installed in the control panel, with the battery system and supplies, from battery voltage directly, the emergency circuits during ESD phases. Main advantage Enclosure made in explosion proof Suitable for […]
Emergency Circuits
Working voltage: 24VDC Installation: Zone 1&2 Capacity: Driver for Lanterns, Fog Horns & Obstruction lights Navigation aids emergency circuits in Atex enclosure This equipment is suitable to supply the navigation aid equipment or aeronautical obstruction lights during ESD phases, when the centralized control panel is cutting off for safety reasons. Main advantage Enclosure made in […]
Control Panel (Indoor Version)
Made in: Iron sheet, thickness 15/10 Paint: In accordance with the standard constructor procedure Colour: On request Typical high: 2000mm (min 1600/max 2200, without socket) Navigation aids indoor control panel made on customer specification, in accordance with applicable rules The control panel is suitable for inside installation (in the control room) in safe area. It’s […]
Control Panel (Ex Version)
Working voltage: 24VDC or 230VAC Installation: Zone 1&2 Protection degree: IP 66 Navigation aids centralized control panel made on customer specification and in accordance with applicable rules The Ex control panel is suitable for outdoor installation in classified area (1&2).It’s suitable to contain any electrical devices like drive circuits, battery chargers, voltage stabilizers, telemetry interfaces, […]
Repeater Light
Average power: 7W peak (on time) – 1W (off time) Colour: Light with red colour as define in ICAO In accordance to: ICAO & CAA CAP 437 Protection degree: IP 66 Helideck status lights. The repeater lights are used to guarantee the “on deck” 360° coverage in azimuth where only statu light are not sufficient. […]