Control Panel (Indoor Version)
Made in: Iron sheet, thickness 15/10 Paint: In accordance with the standard constructor procedure Colour: On request Typical high: 2000mm (min 1600/max 2200, without socket) Navigation aids indoor control panel made on customer specification, in accordance with applicable rules The control panel is suitable for inside installation (in the control room) in safe area. It’s […]
Control Panel (Ex Version)
Working voltage: 24VDC or 230VAC Installation: Zone 1&2 Protection degree: IP 66 Navigation aids centralized control panel made on customer specification and in accordance with applicable rules The Ex control panel is suitable for outdoor installation in classified area (1&2).It’s suitable to contain any electrical devices like drive circuits, battery chargers, voltage stabilizers, telemetry interfaces, […]
Ulluminated Windsock
Average power: 85W (without top light) Support pole: Stainless steel AISI 316L In accordance to: ICAO annex 14, CAA CAP 437 & IMO Modu code 2009 Protection degree: IP 66 Helideck lighting illuminated windsock. System to illuminate the windsock in a offshore field. Main advantage Low power consumption Suitable for classified area (Zone 1&2) Easy […]
Floodlight
Average power: 19W (220VAC) Luminouse intensity: 8000 cd In accordance: ICAO annex 14, CAA CAP 437 and IMO Modu code 2001 Protection degree: IP 66 LED Ex helideck floodlights. The LED floodlight in accordance with ICAO annex 14, CAA CAP 437 AND IMO is designed to illuminate the area of circle and the “H” on […]
Perimeter Lights
Average power: 2.5W (5.8VA 220AC) Luminouse intensity: according to CAP 437 In accordance to: CAP 437 Protection degree: IP 66 LED Ex helideck perimeter lights. The Perimeter lights in accordance with ICAO annex 14, CAA CAP 437 AND IMO is designed to illuminate the landing area on the helideck. Main advantage Low power consumption Suitable […]
Repeater Light
Average power: 7W peak (on time) – 1W (off time) Colour: Light with red colour as define in ICAO In accordance to: ICAO & CAA CAP 437 Protection degree: IP 66 Helideck status lights. The repeater lights are used to guarantee the “on deck” 360° coverage in azimuth where only statu light are not sufficient. […]
Status Lights
Average power: 70W average at 2hz Colour: Light with red colour as define in ICAO In accordance to: ICAO & CAA CAP 437 Protection degree: IP 66 Helideck status lights. The status lights system in accordance with ICAO annex 14, CAA CAP 437 is designed to be visible (at least one light) to the pilot […]
Circle-H
Average power: Less than 100W for a typical system Housing: Copper-free (<0.4%) heat treated aluminium In accordance to: CAA CAP 437 Protection degree: IP 67 Circle-H helideck lighting system. System to illuminate the “H” and the circle around the “H” in a offshore helideck. Main advantage Low profile with all external hardware in stainless steel […]
Delvalle Aluminium Junction Box GUB IP66/67
GUB Series junction boxes have a screw cap and are used either as junction boxes with/without terminals or for installation of electrical equipment such as fuses, relays, disconnectors, remote control switches, transformers, ballast,… Let us help you!
Delvalle Control Desk Atex & IECEx
This Atex & IECEx desk allows the control of many Atex & IECEx components and devices from control panel thanks to the easy control with selectors, push buttons, buttons with key, viewers, red mushrooms, alarms, light signals…Its use is for industries zones with explosion risk, oil & gas and petro chemical industries.It’s based on the […]
Delvalle Ex Atex 19″ Rack
The increased-safety IP66 stainless steel Ex Rack 19″ enclosure Luxorex and Tibex stands out for its robustness and a very spacious interior. For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure’s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants and they are certified to be used at hazardous […]
Delvalle Flameproof Enclosure Window Ex d EJB
EJB Series flameproof connection boxes with window are suitable for installations in areas where there are risks of explosion, and also at places where dust or combustible gases are present. Ideal to interconnect the wires and to accommodate a vast variety of equipment and instruments. The enclosures are equipped with a lid with flanged joints, […]
Delvalle Atex Explosion Proof Enclosure Ex D
The explosion proof enclosures EJB series Ex d enclosures are made to be installed in areas classified Zone 1, 2, 21 and 22, where there is danger of explosion and/or fire or presence of combustible dusts.Explosion proof junction box,expplosion proof enclosure,hazardous enclosures,ex d enclosures. Call us now and save money!
Delvalle Atex Junction Box IP68
The increased-safety Geoex Series IP68 junction box is made in either AISI 304L or 316L stainless steel. Certified to be used in zones 1, 2, 21 and 22, it is greatly valued for its high security and resistance even in the harshest environments. We can make it to any dimension required by our customers, up to a […]
Delvalle Atex Junction Box IP67
The increased-safety Geoex Series IP67 junction box is made in either AISI 304L or 316L stainless steel. Certified to be used in zones 1, 2, 21 and 22, it is greatly valued for its high security and resistance even in the harshest environments. We can make it to any dimension required by our customers, up to a […]