XPERT 7 Base – Deep
The Intelligent Deep Base is a mounting base for Discovery and XP95 products which has an increased depth allowing for cables to be inserted from the side. Enables surface wiring XPERT addressing Locking feature to prevent unauthorised detector removal
XPERT 7 Base – Black
The base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases. XPERT Addressing One way fit of detector Locking feature to prevent unauthorised detector removal
XPERT 7 Base
The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation. XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the XP95 and Discovery detector ranges
Isolator Base
The Isolator Base is unique and designed to only accept the Isolator 55000-720.
XP95 Optical Smoke Detector – Black
The XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. Reliable fire detection in areas with a wide temperature range from -20°C to +60°C Ideal for escape routes Unaffected by wind and atmospheric pressure Insect resistant screen
XP95 Optical Smoke Detector
The XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. Reliable fire detection in areas with a wide temperature range from -20°C to +60°C Ideal for escape routes Unaffected by wind and atmospheric pressure Insect resistant screen
XP95 Optical Smoke Detector
The XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. Reliable fire detection in areas with a wide temperature range from -20°C to +60°C Ideal for escape routes Unaffected by wind and atmospheric pressure Insect resistant screen
XP95 Multi-Sensor Detector (Optical/Heat)
XP95 Heat Detector (CS)
The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature.
XP95 Heat Detector (A2S)
The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C. Reliable fire detection in areas with a wide temperature range from -20°C to +70°C Ideal for environments that are dirty or smoky under normal circumstances Unaffected by […]
XP95 Heat Detector (A2S)
The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C. Reliable fire detection in areas with a wide temperature range from -20°C to +70°C Ideal for environments that are dirty or smoky under normal circumstances Unaffected by […]
Fire System Power Supply Box
AS-PSU9A is an external power supply in a compact metal housing for holding up two 12V / 7 Ah batteries. It provides additional uninterruptible power for use in fire, security, alarm, access control, cctv systems. It is listed for indoor dry locations and can easily be installed where needed.
ART Addressable Repeater Panel
Technical Parameters： 1.Operating environment: indoors, temperature -10℃~+50℃, and the relative humidity ≤95%(40℃±2℃ without condensation) 2.Operating voltage: bus24V，DC24V±20% 3.Mounting positions: Wall-mount 1.3~1.5m from the ground 4.Contact capacity: passive: Normal open/Normal close, active: 1.25A@DC 30V 5.Dimension：160x120x45(mm) 6.Certifications: EN54
AIS Isolator Module
ANSORL short circuit isolators are used for the short circuit fault protection of buses. When a bus circuit is operating normally, the short circuit isolator will not operate; when a short circuit fault occurs at a place at the output end of the short circuit isolator in the bus circuit (short-circuit current＞200mA), the section suffering […]
AIO Input/Output Module
The AS-AIO I/O module (AS-AIO module for short) is used with a two-bus linkage fire alarm control system. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers, blow valves and fire dampers) and receive the feedback signals of the fire linkage equipment so that a judgment on […]