AIM Input Module
The AS-AIM Intelligent input module (AS-AIM module for short) is used with a two-bus fire alarm control panel. It can be connected with a conventional smoke detector, a conventional heat detector, a conventional manual call point, a conventional hooter/horn and some other equipment. After the said equipment starts to operate, the alarm signal output will […]
AGD109 Addressable Combustible Gas Detector
Technical Parameters： 1. Operating Volt： DC24V，voltage range： 12～28V 2. Operating Current：Monitoring status, ≤ 35mA @DC24V； Alarm status, ≤ 40mA @DC24V. 3. Two Bus system：Non polarity two-wire system, current ＜ 400µA 4. Operating environment: Temperature: 0℃～ 55℃; relative humidity: ≤95% (40℃±2℃, without condensation) 5. Alarm Level: Natural gas 10%LEL（±30％）,LPG 4% LEL (±3% LEL) 6. Response timing： […]
AHS Addressable Strobe Sounder
Product Features Built-in standalone CPU, quick calculating speed and excellent stability Non-polarity two-wire bus to make cabling easy, and avoid wrong wiring Sounder/ visual indicator setting freely according to different environment. With super bright red LED, it features markedness, long lifespan, and low consumption. Special production process to make the device work at high temperature, […]
AMCP Addressable Manual Call Point
Product Features： 1.Built-in standalone CPU, quick calculating speed and excellent stability. 2.Non-polarity two-wire bus to make cabling easy, and avoid wrong wiring. 3.Pressing the lever sheet on the fire call points to confirm the fire alarm, it can be reset by the special tool. 4.It has a built-in fire telephone jack and a PHONE indicator. […]
DZ102S Addressable Strobe Sounder Base
The strobe sounder is designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently. It can realize electronic coding and rewrite the address via coder in situ. It uses multiple super bright red LEDs as light sources for visual display, ensuring a […]
ASH107 Addressable Smoke/Heat Combined Detector
Product Features： 1.Composite smoke-sensing and temperature-sensing detector is a multi-element composite detector constituted jointly by a smoke sensor and a semiconductor temperature sensor in respect of technological structure and circuit structure. 2.Built-in standalone CPU, quick calculating speed and excellent stability. 3.Non-polarity two-wire bus to make cabling easy, and avoid wrong wiring. 4.It adopts backward scattering […]
AHD105 Addressable Heat Detector
Product Features： 1.Built-in standalone CPU, quick calculating speed and excellent stability. 2.Non-polarity two-wire bus to make cabling easy, and avoid wrong wirin. 3.Sealed robber type of heat sensitivity component enhances anti-humidity and anti-erosion. 4.Three sensitivity levels of the detector are optional at the control panel to suit different environments. 5.Temperature rising compensation to improve responsive […]
ASD102 Addressable Smoke Detector
Product Features： 1.Built-in standalone CPU, quick calculating speed and excellent stability. 2.Non-polarity two-wire bus to make cabling easy, and avoid wrong wiring 3.Built-in a standalone CPU which can process the sampling data in real-time. 4.It adopts backward scattering maze and makes it more sensitive to detect the smoke generated from burning of different materials. 5.Support […]
MN3010 Addressable 1 Loop Fire Alarm Control Panel
1. Adopts the latest generation of high-speed microprocessor. Data processing rate and data storage capacity reach 100-fold and 1000-fold increase, respectively, compared to traditional technologies. 2. MN3010 is provided with 4.3″ color display screen (LCD), with a display resolution of 430×272. 3. The operation interface imitates Windows menus and window interfaces and is almost the […]
2-16 Loops Addressable Fire Alarm Control Panel AS-9108E
Adopts the latest generation of high-speed microprocessor. Data processing rate and data storage capacity reach 100-fold and 1000-fold increase, respectively, compared to traditional technologies. ANSORL 9108E is provided with 7″ color display screen (LCD), with a display resolutionof 800×480. The operation interface imitates Windows menus and window interfaces and is almost the same as the […]
RIL-06 Remote LED Indication
This remote led indicator is an warning device used in installation where a detector goes to alarm is likely to occur behind a locked door, inaccessible rooms, or in a ceiling void to provide indication of the activation of a fire detector. The indicator’s design widely applies to all kinds of commercial constructions requiring a […]
GST102 Infrared Reflective Beam Smoke Detector
Conventional Reflective Beam Detector (hereinafter called the detector) is a non addressable reflective infrared beam smoke detector, which must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. With excellent built-in microprocessor, the detector has strong ability of analysis and judgment. […]
MCP-EW Manual Call Point Weather-proof Enclosure
MCP-EW manual call point enclosures provide a weather proof enclosure for ANSORL manual call points. Access to the manual call point is provided by an easy-to-operate Lock, to unlock the hinged transparent cover. The weather proof enclosure provides fire detection and alarm system designers with a premium solution for outdoor life safety and property protection […]
MCP-05 Manual Pull Station
AS-MCP-05 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when the switch inside is closed. So AS-MCP-05 conventional manual call point is only used with conventional […]
SHD109 Smoke/Heat Combined Detector
AS-SHD109 Smoke&Heat Detector work perfectly with all conventional intelligent fire control panels This Conventional Multi-detector uses an intelligent optical sensing chamber and a thermal sensor at the same time to detect smoke and heat. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels where […]