Discovery UL Manual Pull Station – Dual Action
56000-005USA The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system. UL38 Certified Reports an alarm in under 0.2 seconds Key lock Easily resettable Suitable for semi flush or surface mounting XP95, (Discovery and CoreProtocol compatible)
XP95A Mini Switch Monitor Module
55000-831USA The XP95A Mini Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts and to report the status to Apollo compatible analog control equipment. Three input states – ’normal’, ’trouble’, and ’alarm’ Visible LED with remote LED connection option Loop-powered Designed to fit into
XP95A Mini Priority Switch Monitor Module
55000-830USA The XP95A Mini Priority Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station […]
Smoke Capsule (Pack of 3)
29600-464 Testifire Capsules use the latest technology stimuli generation and delivery, eliminating detector contamination and damage risk through controlled release.
Cordless Heat Detector Tester
29600-212 Test and maintenance equipment for smoke, heat and CO detectors.
Isolator
55000-750USA The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section. Detects wiring short-circuits using patented technology Minimizes disruption from […]
Discovery UL Manual Pull Station Backbox
56000-006USA The Discovery UL Manual Pull Station Backbox is used to allow surface mounting of the Discovery UL Manual Pull Station. UL Approved
XP95A Switch Monitor Module
55000-805USA The XP95A Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts connected and to report the status to Apollo compatible analog control equipment. Three input states – ’normal’, ’trouble’, and ’alarm’ Visible LED Loop-powered
XP95A Switch Monitor Input/Output Module
55000-820USA The XP95A Switch Monitor Input/Output Module is used to control a single pole changeover relay output and monitor a single monitored switch input and an unmonitored, non-polarised opto-coupled input normally open contact input and control relay output contacts. UL 864 Certified Reports ‘trouble’, ‘switch open’ and ‘switch closed’ status Suitable for mounting on a […]
XP95A Relay Output Module
55000-863USA The XP95A Relay Output Module provides a single 2-pole changeover relay. Loop-powered Can be placed anywhere on loop
XP95A Priority Switch Monitor Module – Dual Channel
55000-790USA The XP95A Priority Switch Monitor Module contains two Priority Switch Monitor Modules on a single plate. Loop-powered Fast response time Interrupt facility
XP95A Priority Switch Monitor Module
55000-806USA The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a Pull Station is […]
XP95A Input/Output Module (120V AC)
55000-859USA The XP95A Input/Output Module is a loop-powered device which incorporates a monitored input circuit for connection to dry contacts, as well as a 120V AC 4A rated dry contact relay output. It is mounted in a plastic facia plate for use with a 4″ squareor two-gang electrical back box. Loop-powered Visible LEDs
XP95A AV Control Module
55000-825USA The XP95A AV Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel. Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off May be synchronized when in pulsed operation Can also be used for public address speakers
XP95A Open-Area Sounder – Red Body – Isolating
55000-041USA The XP95A Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery UL or XP95A system. For use with XP95A and Discovery UL systems Self-test fault monitoring Two volume settings 92dB(A) and 100dB(a) Built in isolator Synchronisation of tones Individual and group addressing Red or white options […]