Discovery Open-Area Sounder VID – White Body (Red Flash)
58000-007APO The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a ‘Magnetic Wand’ can be used to adjust and test each sounder locally. 15 tone pairs Individual control of the sounder and visual […]
Discovery Open-Area Sounder VID – Red Body (Red Flash)
58000-005APO The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a ‘Magnetic Wand’ can be used to adjust and test each sounder locally. 15 tone pairs Individual control of the sounder and visual […]
Isolator – Negative
55000-720APO The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section. Detects wiring short-circuits Minimises disruption from short-circuits Automatic de-isolation on […]
XPERT 7 Base – Isolating
45681-284APO The XPERT 7 Base – Isolating senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits. Detects wiring short-circuits High brightness LED Up to 20 detectors or their equivalent load, may be installed between isolating bases
XPERT 7 Base – Heated
45681-219APO The base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors. Raises the ambient temperature of a detector chamber by approximately 10°C Limits the risks or potential for losses of functionality of detectors installed in cold conditions.
XPERT 7 Base – Deep
45681-209APO The Intelligent Deep Base is a mounting base for Discovery and XP95 products which has an increased depth allowing for cables to be inserted from the side. Enables surface wiring XPERT addressing Locking feature to prevent unauthorised detector removal
XPERT 7 Base – Black
45681-361APO The base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases. XPERT Addressing One way fit of detector Locking feature to prevent unauthorised detector removal
XPERT 7 Base
45681-210APO The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation. XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the XP95 and Discovery detector ranges
Isolator Base
45681-211APO The Isolator Base is unique and designed to only accept the Isolator 55000-720.
Discovery Optical Smoke Detector
58000-600APO The Discovery Optical Smoke Detector are high-specification devices using the light scatter principle to quickly detect fire while effectively managing false alarms. Reliable fire detection in areas with a very wide temperature range from -40°C to +70°C Five operating modes suitable for a range of applications where unique response behaviour is required Drift […]
Discovery Multi-Sensor Detector (Optical/Heat)
58000-700APO The Discovery Multi-Sensor Detector consists of optical smoke and thermistor temperature sensors which give a combined signal for improved false alarm management. Reliable fire detection in areas with a very wide temperature range from -40°C to +70°C Five operating modes for customised fire detection and enhanced false alarm management Drift compensation to ensure constant […]
Discovery Multi-Sensor Detector (CO/Heat)
58000-305APO The Discovery Multi-Sensor Detector contains a CO detection cell and a thermistor temperature sensor whose outputs are combined to give the final analogue value. Responds to smouldering and flaming fires Less susceptible to false alarms caused by steam and dust Five response modes Remote test feature
Discovery Heat Detector
58000-400APO The Discovery Heat Detector features a low air flow resistance case and a single thermistor to sense the air temperature around the detector. Reliable fire detection in areas with a very wide temperature range from -40°C to +70°C Five operating modes suitable for a range of application temperatures Ideal for environments that are dirty […]
Discovery Carbon Monoxide Detector
58000-300APO The Discovery Carbon Monoxide Detector contains a long-life electro-chemical carbon monoxide sensor which is tolerant of low levels of common vapours and household products. Enhanced detection capability Ideal for smouldering fires Less susceptible to false alarms caused by steam than smoke detectors Five response modes Remote test feature