Duct Detector Sampling Tube (300-750mm duct width)
53541-170APO Sampling Tube for duct smoke detectors.
Duct Detector Sampling Tube (1500-3000mm duct width)
53541-172APO Sampling Tube for duct smoke detectors
Duct Detector Housing (Orbis)
53546-023APO The Duct Detector Housing provides early detection of smoke in the air moving through heating and ventilation (HVAC) ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire when used with a Series 65 or Orbis detector. For […]
Series 65 Flame Detector (UV) – Base Mounted
55000-025APO The Series 65 Flame Detector (UV) is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a fast-acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious […]
Flame Detector Weather Shield
29600-206 The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight
Flame Detector Bracket
29600-203 The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Allows flame detector to be mounted in any orientation.
Exd Flame Detector Weather Shield
29600-228 The Flame Detector Weather Shield protects the device from inclement conditions. Protects against water ingress Protects sensor from direct sunlight
Conventional Flame Detector (UV/IR2) [SIL2]
55000-064APO The combination of UV and IR2 detection, plus signal processing allows the sensor to be used without risk of false alarms in difficult situations chracterised by factors such as flickering blackbody by radiation or arc welding. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed […]
Conventional Flame Detector (IR3) [SIL2]
55000-019APO The Conventional Flame Detector (IR3) is designed for harsh environments in indoor applications. The detector has three sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self […]
Conventional Flame Detector (IR2) [SIL2]
55000-060APO The Conventional Flame Detector (IR2) is designed for harsh environments in indoor applications. The detector has two sensors which respond to different IR wavelengths to discrimintae between flames and spurious sources of radiation. Class 1 sensitivity to EN 54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self test […]
Reflective Beam Detector Head (Add-on) – Auto-Aligning
29650-070 Additional Head for the Auto-Aligning Beam Detector.
Conventional Reflective Beam Detector – Auto-Aligning
29650-069 The Conventional Reflective Beam Detector comprises of a ground level controller, detector head with auto-aligning feature, integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.
Conventional End to End Beam Detector
29600-929 The Conventional End to End Beam Detector has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The […]
Beam Detector Surface Mounting Plate
29600-528 Surface Mounting Plate for Auto-Aligning Beam Detector.
Beam Detector Prism Plate (4 prisms)
29600-529 Mounting Plate (4 Prisms)