Soteria UL Switch Monitor Input/Output Module

SA4705-703APO The Input/Output Module is a loop-powered device which incorporates a monitored input circuit for connection to remote switches. It also has a 240 V rated volt-free relay output. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL Relay Output Module

SA4705-701APO The Relay Output Module is a loop-powered device which incorporates a 240 V rated volt-free relay output. The module can be used outdoors if mounted in a suitable weatherproof enclosure. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL NAC Module

SA4705-706APO The NAC Module enables sounders to be operated continuously or be pulsed. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronized when in pulsed operation. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL Mini Switch Monitor Module

SA4705-600APO The Mini Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install Interrupt facility Selectable priority of inputs
Soteria UL Input Module

SA4705-700APO The Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install Interrupt facility Selectable priority of inputs
Soteria UL NAC Module

SA4705-706APO The NAC Module enables sounders to be operated continuously or be pulsed. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronized when in pulsed operation. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
XP95A Open-Area Sounder – Red Body – Isolating

55000-041USA The XP95A Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery UL or XP95A system. For use with XP95A and Discovery UL systems Self-test fault monitoring Two volume settings 92dB(A) and 100dB(a) Built in isolator Synchronisation of tones Individual and group addressing Red or white options […]
Discovery UL Open-Area Sounder VID – Red Body (Red Flash)

58000-011USA Discovery UL Open-Area Sounder Visual Indicator with red body and red flash. UL 464 Certified 15 Pairs of Tones (EN54-3 Sounder) 7 Volume Levels Visual Indicator Beacon (Red-Flash) Discovery (works on XP95 & CoreProtocol)
XPERT 7 Base 6″ – E-Z Fit

45681-250USA The base is a low profile 6″ mounting base for XP95A detectors. High degree of protection against unauthorised removal
XPERT 7 Base 6″

45681-225APO All detectors in the XP95A product line fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detector terminals. XPERT Cards are supplied with all bases. XPERT addressing One-way fit Locking feature to prevent unauthorised removal
XPERT 7 Base 4″ – Isolating

45681-284UL The base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits. Detects wiring short-circuits High brightness LED Up to 20 detectors or their equivalent load, may be installed between isolating bases
XPERT 7 Base 4″

45681-210UL The base is a low insertion force base with stainless steel contacts allowing easy and quick installation. XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the XP95A detector ra
– Soteria UL Base 4”

SA5000-210APO The Soteria UL Base – 4″ base is an easy-fit 4″ base, compatible with Apollo’s latest Soteria UL and XP95A detector ranges. Single base that supports isolated Soteria UL and non-isolated XP95A detectors 8 bit address card for additional address support when used with Soteria UL detectors and CoreProtocol Designed to replace shallow and […]
Isolator Base

45681-211USA The Isolator Base is unique and designed to only accept the Isolator 55000-720.
XP95A Smoke Detector – UL268 7th Edition

SA5050-250APO The XP95A Smoke Detector uses new sensing technology, Purelight®, to detect smoke particles entering the chamber. This reduces the possibility of false alarms whilst increasing the reliability of detection of a real fire. Fully approved to the latest UL268 7th Edition and FM standards Purelight® optical technology provides enhanced smoke detection and false alarm […]