XP95A Switch Monitor Input/Output Module
55000-820USA The XP95A Switch Monitor Input/Output Module is used to control a single pole changeover relay output and monitor a single monitored switch input and an unmonitored, non-polarised opto-coupled input normally open contact input and control relay output contacts. UL 864 Certified Reports ‘trouble’, ‘switch open’ and ‘switch closed’ status Suitable for mounting on a […]
XP95A Relay Output Module
55000-863USA The XP95A Relay Output Module provides a single 2-pole changeover relay. Loop-powered Can be placed anywhere on loop
XP95A Priority Switch Monitor Module – Dual Channel
55000-790USA The XP95A Priority Switch Monitor Module contains two Priority Switch Monitor Modules on a single plate. Loop-powered Fast response time Interrupt facility
XP95A Priority Switch Monitor Module
55000-806USA The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a Pull Station is […]
XP95A Input/Output Module (120V AC)
55000-859USA The XP95A Input/Output Module is a loop-powered device which incorporates a monitored input circuit for connection to dry contacts, as well as a 120V AC 4A rated dry contact relay output. It is mounted in a plastic facia plate for use with a 4″ squareor two-gang electrical back box. Loop-powered Visible LEDs
– XP95A AV Control Module
55000-825USA The XP95A AV Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel. Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off May be synchronized when in pulsed operation Can also be used for public address speakers
Soteria UL Switch Monitor Input/Output Module
SA4705-703APO The Input/Output Module is a loop-powered device which incorporates a monitored input circuit for connection to remote switches. It also has a 240 V rated volt-free relay output. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL Relay Output Module
SA4705-701APO The Relay Output Module is a loop-powered device which incorporates a 240 V rated volt-free relay output. The module can be used outdoors if mounted in a suitable weatherproof enclosure. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL NAC Module
SA4705-706APO The NAC Module enables sounders to be operated continuously or be pulsed. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronized when in pulsed operation. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
Soteria UL Mini Switch Monitor Module
SA4705-600APO The Mini Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install Interrupt facility Selectable priority of inputs
Soteria UL Input Module
SA4705-700APO The Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install Interrupt facility Selectable priority of inputs
Soteria UL NAC Module
SA4705-706APO The NAC Module enables sounders to be operated continuously or be pulsed. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronized when in pulsed operation. Built-in isolator Tri-coloured LEDs status reporting Ground fault detection Easy to install
XP95A Open-Area Sounder – Red Body – Isolating
55000-041USA The XP95A Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery UL or XP95A system. For use with XP95A and Discovery UL systems Self-test fault monitoring Two volume settings 92dB(A) and 100dB(a) Built in isolator Synchronisation of tones Individual and group addressing Red or white options […]
Discovery UL Open-Area Sounder VID – Red Body (Red Flash)
58000-011USA Discovery UL Open-Area Sounder Visual Indicator with red body and red flash. UL 464 Certified 15 Pairs of Tones (EN54-3 Sounder) 7 Volume Levels Visual Indicator Beacon (Red-Flash) Discovery (works on XP95 & CoreProtocol)
XPERT 7 Base 6″ – E-Z Fit
45681-250USA The base is a low profile 6″ mounting base for XP95A detectors. High degree of protection against unauthorised removal