Conventional End to End Beam Detector
29600-929 The Conventional End to End Beam Detector has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The […]
Beam Detector Surface Mounting Plate
29600-528 Surface Mounting Plate for Auto-Aligning Beam Detector.
Beam Detector Prism Plate (4 prisms)
29600-529 Mounting Plate (4 Prisms)
Beam Detector Prism Plate (1 prism)
29600-530 Mounting Plate (1 Prism) for the Auto-Aligning Beam Detectors.
Beam Detector Extension Kit (50-100m)
29600-526 Extension Kit for the Auto-Aligning Beam Detector.
Beam Detector Bracket
29600-527 Universal Bracket for the Auto-Aligning Beam Detector.
Beam Detector Backbox
29600-241 The Beam Detector Backbox allows easy first fixing of the cabling and terminations to the XP95 Reflective Beam Detector. The backbox can be surface or flush mounted. Aesthetically pleasing
Conventional Manual Call Point (without LED)
55100-001APO The Conventional Manual Call Point is used to manually initiate an alarm signal on the fire detection system. EN 54-11 Certified ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning Suitable for semi flush or surface mounting
Conventional Manual Call Point – Yellow (without LED)
55100-002APO The Conventional Manual Call Point is commonly used to manually control extinguishant release. Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning Suitable for semi flush or surface mounting
Conventional Manual Call Point – Outdoor (without LED)
55100-003APO The Conventional Waterproof Manual Call Point is used to manually initiate an alarm signal on the fire detection system. Suitable for weatherproof applications EN 54-11 Certified ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning
Conventional Manual Call Point – Outdoor – Yellow (without LED)
55100-004APO The Manual Call Point is commonly used to manually control extinguishant release. Suitable for weatherproof applications ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning
Conventional Manual Call Point – Outdoor
55200-003APO The Manual Call Point is used to manually initiate an alarm signal on the fire detection system. Suitable for weatherproof applications EN 54-11 Certified Resettable operating element 170° viewable LED
Conventional Manual Call Point – Dual Switch – Green
SA5900-011APO The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency. Resettable operating element Double Pole change-over contacts Suitable for semi flush or surface mounting
SC2900-001APO – Conventional Manual Call Point
SC2900-001APO The Manual Call Point is used to manually initiate an alarm signal on the fire detection system. EN 54-11 Certified Resettable operating element 170° viewable LED Suitable for semi flush or surface mounting
Conventional Open-Area VAD Cat. W – Red Body (White Flash) (W-3.1-11.3)
29600-800 Sonos Pulse conventional wall mounted Visual Alarm Devices are available with a white and red flash colour. The white flash variant has an EN 54-23 approved coverage pattern of W-3.1-11.3, whereas the red flash variant has a coverage pattern of W-2.4-7.5. EN 54-23 approved Flash Colour: Red or White Synchronised Flash IP65 (deep base)