Beam Detector (Eazy Beam)
Auto alignment | Easy Installation | Standalone Detector. Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold. 2 Green LEDs and 1 Yellow LED for alignment status. System status: Green LED flashing every 10 sec in normal condition; Red LED flashing every 10 sec in alarm condition; Yellow LED flashing every […]
Addressable Manual Pull Station (RE-176P Series)
UL listed 9th edition Resettable type. Single gang mounting. Painted Die Cast Housing. Available : Single/Dual action
Addressable Modules
Module status by RED LED indications. Analogue communications with panel. Module addressing by 8 way DIP switches. All modules are loop powered. Available : Control / Monitor / Relay Module
Addressable Detectors (RE-317 Series)
Polarity free wiring Dual blinking LEDs at 360° visibility. Inbuilt drift compensation facility. Sensitivity setting based on Day/Night mode. Three level sensitivity settings high/ medium/ low. Smoke sensitivity: (2,12+ 0.61) % /ft High: 1.4 %ft / Medium 1.9 % ft Low: 2.3% ft / Air velocity: 0-4000 fpm. Fixed Temperature: 59° C (138° F) Rate […]
Repeater Panel (Avani RP (PASSIVE))
Operating voltage 24V DC. 160 character LCD display with touch keypad. 2000 Event log with RTC. USB 2.0 Interface for PC connectivity. RS 485 inbuilt connectivity.
Analogue Addressable Panel (Avani)
UL Listed (9th Edition) as per NFPA-72 Standards. Device / Detector wise configuration facility. 2000 Event Storage with Real Time Clock. Upto 192 grouping and Auto learning facility.. All field wiring are power limited and supervised. Programmable detector sensitivity. Loop wise remote device test. 5 IDC Loops (4 Addressable and 1 Conventional loop). Maximum 4 […]
Response Indicator
Operating current @10mA. Alarm status in red color LED. Ceiling type.
Sounder
Slim and sleek. 100db+5% @1meter. Operating current @40mA
Sounder/Sounder Cum Strobe
UL Certified. 24V DC operation. Continues and temporal audioable tone settings. 4 candela setting.
Manual Call Point
Operates on 24V DC. One number C&NC output. Alarm status in red colour LED.
Manual Pull Station
UL certified & NFPA-72 complies. Single and Dual action switch. Break glass rod. Painted die cast housing.
TCP / IP Module
Supports with RE 900 series panels. TCP server & UDP drive operation modes. Ready to use TCP/IP firmwire for fast integeration. Low power consumption. RJ-45 for Communication interface.
4 Zone With 2 Agent Release Panel
UL certified & NFPA-72 complies. 4 class B initiating device circuit (IDC). 2 class B releasing agent circuit (RAC). Two modes of operation auto/manual. Programmable 244V DC outputs. 200 Events history log with RTC. Special logic circuitry to prevent accident release. Earth fault annunciation facility. Programmable RAC’s with count down timer. Programmable AC loss delay/trouble […]
Repeater Panels
Repeater Panels Location entry facility for individual zones. RS 485 repeater communication. Repeater panel can monitor the status of the main panels. RE-RP SERIES Compatible for RE-2554/RE-2558. RE-900RP SERIES Compatible for RE-900 Series. RE-127 GR Compatible for RE-120GR & RE-25AR.
2 Zone With One Agent Release Panel
2 Zone With One Agent Release Panel Operates on 220V AC supply. Gas inhibit and instant release facility. Actuator pressure low sensing facility. Manual gas release with or without timer. Programmable solenoid output with ON and OFF timer. Programmable main/standby cylinder output facility. 3 Sounder output 24V (Fire, after cross zone, after gas release).