Discovery Manual Call Point – Outdoor
58100-950APO Coming soon The Manual Call Point is used to manually initiate an alarm signal on the fire detection system. Suitable for weatherproof applications EN 54-11 Certified Reports an alarm in under 0.2 seconds ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning XP95 & Discovery compatible
Discovery Manual Call Point – Isolating
58100-908APO The Discovery Manual Call Point is used to manually initiate an alarm signal on the fire detection system. EN 54-11 & EN 54-17 Certified Reports an alarm in under 0.2 seconds ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning Suitable for semi flush or surfa
Discovery Manual Call Point
58100-910APO The Discovery Manual Call Point is commonly used to manually control extinguishant release. EN 54-11 Certified Reports an alarm in under 0.2 seconds ‘Plug and Play’ terminal connections for faster wiring Continuity link for wiring test before commissioning Suitable for semi flush or surface mounting XP95 & Discovery compatible
XP95 VAD Base Cat. O (White Flash) – Isolating
45681-709APO The XP95 VAD Base incorporates a loop-powered VAD with a standard mounting base. It is used to signal a visual fire alarm warning in enclosed areas. EN 54-23 Certified Category O VAD 0.5Hz Flash Rate (white) Synchronisation of VAD flash Individual & group addressing Unique VAD self-test Loop-powered Built-in isolator
XP95 Sounder VAD Base Cat. O (White Flash) – Isolating
45681-705APO XP95 Sounder VAD Base with integral isolated mounting base. Designed for indoor use. Two-Tone EN54-3 Sounder Multiple Selectable Volume EN54-23 Category ‘O’ VAD Beacon (White-Flash) XP95 (works on Discovery & CoreProtocol) 4″ Isolated Base EN54-17
XP95 Sounder VAD Base Cat. O – DIN Tone (White Flash) – Isolating
45681-707APO The XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. EN 54-23 Certified Category O VAD 0.5Hz Flash Rate (white) Synchronisation of ‘alert’ and ‘evacuate’ tones Synchronisation of visual indicator flash Individual […]
XP95 Open-Area VAD Cat. W – White Body (White Flash) (W-2.4-6)
55000-744APO The XP95 Open-Area VAD Cat. W has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high background noise e.g. in a workshop or a machine room. It might also be […]
XP95 Open-Area VAD Cat. W – Red Body (White Flash) (W-2.4-6)
55000-741APO The XP95 Open-Area VAD Cat. W has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high background noise e.g. in a workshop or a machine room. It might also be […]
XP95 Open-Area VAD Cat. C – White Body (White Flash) (C-3-8)
55000-745APO The XP95 Open-Area VAD Cat. C is specifically designed for use on a ceiling. These devices are used to supplement sounders in areas which carry the risk that sounders will not be heard. Uses high intensity LED EN 54-23 Compliant Category C VAD Flash rate 0.5Hz Fault signal if LED check failed Locking […]
XP95 Open-Area VAD Cat. C – White Body (White Flash) (C-3-15) – Isolator Kit
55000-748APO The XP95 Open-Area VAD Cat. C is specifically designed for use on a ceiling. These devices are used to supplement sounders in areas which carry the risk that sounders will not be heard. Uses high intensity LED EN 54-23 Compliant Category C VAD Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism […]
XP95 Open-Area VAD Cat. C – Red Body (White Flash) (C-3-8)
55000-742APO The XP95 Open-Area VAD Cat. C is designed for indoor use. The Category C VAD is specifically designed for use on a ceiling and comes in two different coverage classes. These devices are used to supplement sounders in areas which carry the risk that sounders will not be heard. Uses high intensity LED […]
XP95 Open-Area VAD Cat. C – Red Body (White Flash) (C-3-15) – Isolator Kit
55000-747APO The XP95 Open-Area VAD Cat. C is specifically designed for use on a ceiling. These devices are used to supplement sounders in areas which carry the risk that sounders will not be heard. Uses high intensity LED EN 54-23 Compliant Category C VAD Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism […]
Discovery Sounder VAD Base Cat. O (White Flash) – Isolating
45681-700APO Discovery Sounder VAD Base with integral isolated mounting base. Designed for indoor use. Two-Tone EN54-3 Sounder Multiple Selectable Volume EN54-23 Category ‘O’ VAD Beacon (White-Flash) XP95 (works on Discovery & CoreProtocol) VdS Approved 4″ Isolated Base EN54-17
XP95 VID Base (Red Flash) – Isolating
45681-333APO The Visual Indicator Base is a loop-powered visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The visual indicator base can be used with either a detector fitted or with a cap as a stand-alone alarm device. Visual indicator flash rate of […]
XP95 Sounder VID Base (Red Flash) – Slow Whoop – Isolating
45681-332APO The Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. Two volume ranges 55-75dB(A) and 75-91dB(A) Visual indicator flash rate of once per second Synchronisation of ‘alert’ and ‘evacuate’ tones Synchronisation of visual indicator […]