Discovery Sounder Base – DIN Tone – Isolating
Discovery Sounder Base with integral isolated mounting base with DIN tone. Designed for indoor use. DIN Tone EN54-3 Sounder Selectable Volumes 50-65dB (A), 65-84dB (A) Discovery (works on XP95) XPert7 Addressing 4″ Isolated Base EN54-17 VdS Approved
Discovery Open-Area Voice Sounder VID – White Body (Red Flash) – Isolating
Discovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices. Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test […]
Discovery Open-Area Voice Sounder VID – Red Body (Red Flash) – Isolating
Discovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices. Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test […]
Discovery Open-Area Voice Sounder – White Body – Isolating
Discovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices. Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test […]
Discovery Open-Area Voice Sounder – Red Body – Isolating
Discovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices. Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test […]
Discovery Open-Area Sounder VID – White Body (Red Flash)
The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a ‘Magnetic Wand’ can be used to adjust and test each sounder locally. 15 tone pairs Individual control of the sounder and visual indicator […]
Discovery Open-Area Sounder VID – Red Body (Red Flash)
The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a ‘Magnetic Wand’ can be used to adjust and test each sounder locally. 15 tone pairs Individual control of the sounder and visual indicator […]
Isolator – Negative
The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section. Detects wiring short-circuits Minimises disruption from short-circuits Automatic de-isolation on the […]
XPERT 7 Base – Isolating
The XPERT 7 Base – Isolating senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits. Detects wiring short-circuits High brightness LED Up to 20 detectors or their equivalent load, may be installed between isolating bases
XPERT 7 Base – Heated
The base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors. Raises the ambient temperature of a detector chamber by approximately 10°C Limits the risks or potential for losses of functionality of detectors installed in cold conditions.
XPERT 7 Base – Deep
The Intelligent Deep Base is a mounting base for Discovery and XP95 products which has an increased depth allowing for cables to be inserted from the side. Enables surface wiring XPERT addressing Locking feature to prevent unauthorised detector removal
XPERT 7 Base – Black
The base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases. XPERT Addressing One way fit of detector Locking feature to prevent unauthorised detector removal
XPERT 7 Base
The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation. XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the XP95 and Discovery detector ranges
Isolator Base
The Isolator Base is unique and designed to only accept the Isolator 55000-720.
XP95 Optical Smoke Detector – Black
The XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. Reliable fire detection in areas with a wide temperature range from -20°C to +60°C Ideal for escape routes Unaffected by wind and atmospheric pressure Insect resistant screen